Notifications
Clear all

Megamagic pads mosaic


fjs714
(@fjs714)
Active Member
Joined: 10 months ago
Posts: 13
Topic starter  

Hi,

  How do I decrease or remove the pluck sound in some of the Multis,  and/or pads?

Thanks  Frank

 

 


Quote
PlugInGuruForums
(@pluginguruforums)
Owner/Guru Admin
Joined: 2 years ago
Posts: 221
 

Hi Frank - I think you're referring to some of the motion elements that are included in the pads, right? Please call up the "Multi" version and then hit the "M" on the different Layers to find the motion element you don't want to have included. Let me know if you have more questions about how to get the most out of this library... Make sure you play with Macro Knob #11 that allows you to switch from 1 layer to another layer easily. Or use knobs 12 - 16 to turn on/off the layers without needing to use the "M" buttons.

Life is Sound / Sound is Divine
www.pluginguru.com


ReplyQuote
fjs714
(@fjs714)
Active Member
Joined: 10 months ago
Posts: 13
Topic starter  

Thanks John for taking the time to get back to me.   Beautiful Library.  I'll give everything you said a try.


ReplyQuote
DOMINIQUE
(@dominique)
Estimable Member
Joined: 2 years ago
Posts: 113
 

dear John

Just for your information. concerning the titled patches (multi pad).

only the "pad destiny Multi" has all the macros including macros 1 to 8 (cutoff attack release and so on).

In the other multi the link parameters macros have not been copied.

it may be an oversight 😊 

Dominique
WIND 10 Reaper 6 Kronos / Omnisphere 2.6 / Keyscape / Stylus / Ravenscroft / Spitfire Originals collection , Arturia Pigments , Rapid Parawave ,Plasmonic, Surge ,Flow motion,Pianoteq


ReplyQuote
OmarD
(@omard)
New Member
Joined: 2 weeks ago
Posts: 4
 

I am trying to authorize my MM mosaic,,I get " unable to reach licensing server"?

Same happening with Unichill, BBC Discover?

This post was modified 2 weeks ago 2 times by OmarD

ReplyQuote
getdunne
(@getdunne)
Member Admin
Joined: 2 years ago
Posts: 2788
 
Posted by: @omard

I am trying to authorize my MM mosaic,,I get " unable to reach licensing server"?

Same happening with Unichil.

I'm sorry to hear you're having trouble. Sometimes the licensing server gets overloaded. Please try a bit later. If it's still not working, email UnifySupport@PlugInGuru.com. If necessary you can do offline authentication via email.


ReplyQuote
OmarD
(@omard)
New Member
Joined: 2 weeks ago
Posts: 4
 

@getdunne Thank You. Will wait.

Sent email,,waited,tried,,not working.

This post was modified 2 weeks ago by OmarD

ReplyQuote
getdunne
(@getdunne)
Member Admin
Joined: 2 years ago
Posts: 2788
 
Posted by: @omard

@getdunne Thank You. Will wait.

Sent email,,waited,tried,,not working.

Did you get this resolved?


ReplyQuote
Share: