Last seen: February 2, 2023 12:15 am
No, that's OK, thank you. I can rework these names automatically using some C++ code I have here. I haven't decided on a final naming scheme yet anywa...
@thsve I forgot to mention one thing: Please name your Milpitas patches using the format Milpitas-<cartridge name> - <preset name>, e.g....
That's terrific, thank you. Just make the patches however you can; I can reform them later. Each patch will be about 101 KB, so the total package will...
The only way to make sidechain connections in Unify is to use ComboBox. To use a macro to cross-fade between two INST layers: Create two paramet...
@craigr68 Thank you for the Capture2Text link and code sample. I will give this a try.
@thsve Excellent suggestions, thank you. For Darwin, I will simply continue the manual typing approach. It doesn't take that long, and works very we...
@robosax When I say "percentage", I really mean "fraction". When the sample-start slider is all the way to the left, it means the actual start of th...
There is no "exact value", except as a percentage of the entire sample length. This is because a typical sample-set has many samples, including very l...
@bep I'm glad to hear you've found some effective work-arounds, but sorry to know that you're still struggling with crashes. Anytime you find a cr...
@robosax You should create one or more CC Assignments Preset, one for each distinct wind controller that you want to support. (I don't know anything...
I agree. Onto the to-do list it goes!
@tkboomer I think you meant "here is the NEW one". Thank you. Attached is an updated version that restores your 468 favorite tags. Use it to replace...
@tkboomer Thank you for sending your original Presets.db file. Could you now please do the same with your NEW one? Then I can merge in the presets h...
@bep Your link got automatically removed again, which caused your post to get held back for moderation. I approved it, so it should be visible to al...
Well, I suppose I could say that the difference between almost 80% and exactly 80% will likely be inaudible, for almost any parameter, but that sort o...
@pbeprod Thank you for the screenshot. I just built a similar patch, making sure to load the second, third, and fourth patches in "Unify/Drum" mode,...
@bep I'm sorry to hear you're having so much trouble with Unify. Apple's M-series chips are not identical. Unify v1.9.x runs well on the original ...
@ibanez Our forum software doesn't allow users to post links until they have been members for a while, and made several other posts. Please specif...
@tkboomer There's an appendix to the Unify manual covering exactly this. Direct link:/p> The basic trick is, after you copy everything, go to Sett...
It seems to be OK now. This may be a glitch due to the site's bandwidth getting overloaded. Please retry and let us know if it works for you.
Ah yes, the well-staffed, well-funded Marketing Dept. of the mighty PlugInGuru Corporation... 🤣 🤣 🤣 🤣 Jokes aside, we do appreciate the feedback!
@despondo These are all great suggestions, but will require considerable work--not just up-front, but forever. The amount of time John has to put in...
One example please, so I can test? A single refresh should be sufficient, unless there are extra copies of patches in folders where they don't be...
I am only able to load the Kontakt 7 Player, because I don't have Komplete 14, but it seems to work fine in Unify. NI is either finally bowing to pr...
That should be correct. I think you mean only the lower (left) side of the key-split, which is the sequenced part. All these patches use BlueARP ...
@leszek-1953 Did you use the Unify Factory Content.guru file that came with Unify 1.9? If you used an earlier one, it's possible you just re-install...
@leszek-1953 After adding, removing, or modifying any patch files in Unify's main content folder, you need to click the "lightning bolt" icon at the...
Important: If you delete the .unify files (or any files) manually, you must click the "lightning bolt" icon at the top-right in Unify, to rebuild the ...
@tkboomer I'm not sure who did the unified library for Sines. I did one myself, using an automation technique, and sent that to John for finishing. ...
@velanche I'm not enough of a Logic Pro expert to answer your question. Other users here may be able to help.
@leszek-1953 Thank you for the sound files, and the additional explanation. I realize that English is not your first language, and I appreciate your...
@velanche I'm glad you found my response useful, and not a complete turn-off! MIDI control is often where a program or plug-in's user-friendly GUI k...
GForce plug-ins don't seem to report the current preset name to their host. Consider reporting this to GForce.
@glenjdiamond Unify will only automatically set the INST layer name if (a) the instrument plug-in supports it, and (b) the layer name hasn't been se...
I have asked John to comment here, but I want to mention a couple of things myself. The main thing you need is to right-click the "bullet" icon (two...
@velanche It certainly is a challenge to keep learning resources updated for a program like Unify, which has undergone so many changes. However, s...
@leszek-1953 It's not so much that your problem "cannot be solved". The issue is, we don't understand what you mean. Perhaps you can explain in more...
@lowell The Macro/CC mapping is not fixed; it's basically a user preference. Unify remembers however you set it up for your specific controller. T...
The Unify 1.8 install/update zip files included a file called Unify 1.8 Content Update.guru. You need to install that, by drag/dropping the .guru file...
@leszek-1953 Thank you for the report. I have passed this on to John, and we will discuss. He may need to ask you more questions to understand the...
@beatfreak82 Still no luck. I'm not sure why you're unable to attach a zip file. Email it to UnifySupport@PlugInGuru.com and ask that it be forwarde...
@arpad-bodis I'm sorry you're having this trouble, but I thank you for letting us know. My best guess is that this may be an issue with the Korg W...