Last seen: January 10, 2022 6:29 am
@getdunne Respectfully, the ILIO update link you posted DOESN'T WORK for getting the update... It just goes to the regular purchase page/demo download...
@getdunne This link is going right to the ILIO Unify page - not an updater download. I really wish there were a better way to get updates instea...
RE: Paid add-ons for Unify Only Shane and John can answer this question as to what their breakeven point will be for development time/costs, but exp...
@erik-van-wees Thanks! I've had that one for a while. I like it a lot, but I still think the OPX is the best - it's too bad the interface is so old an...
@zinct Great news! Thanks for doing that!
Is anyone actually in touch with a contact at UVI for permission to create these (and the Falcon Libraries) for public distribution through the group?...
@zinct Once small problem with the UVI stuff is that the end user can access it either through Falcon or Workstation... Same product but 2 different m...
I have it as well, and it's excellent. Not sure how Unify would offer something similar without raising the price by hundreds of dollars, though...
@getdunne What about so Unify "parent" just minimizes into a tiny window or icon that can be tucked away or hidden off to the side, and resized back t...
@getdunne Got it, THANKS! D
@berndpdx I tried to be very careful and have a fresh start every time - I always did an Init patch before loading the template, and only loaded the F...
@berndpdx I've been working with the Host Automation template for the last hour or so with mixed results - Here's what I've found so far, and I'd be...
Ok, last comment, I promise... So... DO used Assign Host Automation in Falcon to connect it to Linked Parameters with the Macro Knobs in Unify...
I get it... That's why I was doing BOTH - using the linked parameter, as well as assigning a CC to a macro knob when needed (beyond those alrea...
As I was discussing this with Bernd outside of the forum, I am so new and inexperienced at this that I'm flying a bit blind as to what is or isn't a s...
@eddrake I haven't noticed this with an Arturia Keylab 49 MKII. What controller are you using?
@eddrake I'll do the macros for Cinematic Shades Email it over when you're done getting the patches in.
Ed, Why don't you work on Digital Motion. Here's how I personally have been working with the Falcon patches: Here's a screenshot of a preset fro...
@zinct Bernd and I were already working on the Factory set and Atmospherics. In fact, Atmospherics is completely done already, including all macro ass...
@zinct Unfortunately, although there are some Macro assignments (like Delay and Reverb) that are present in like 90% of the patches, the problem is th...
@eddrake Ed, feel free to contact me directly at hexabuzz@hotmail.com I can at least share my experiences with using Unify with Falcon, since we're ...
@zinct Jeremy, I certainly wouldn't object to you working on Digital Motion. What I'd really love is some insight from someone more experience...
@zinct Well, I guess it won't really matter since I'm on Mac :)
@zinct I'll check out AutoHotKey, thanks! I'm scared already, though, because I'm worried I'll need to program something, and I'm just AWFUL at that!
First of all, thanks! Second of all, how long does something like this take you, and how do you do this so quickly? I'm working on the Falcon 2 ...
@berndpdx Can you PLEASE email me directly regarding this project so I'm not cluttering up this thread with questions and attachments of test files? ...
Just my opinion, but we have many, MANY libraries for Omnisphere preset packs... I think this just falls into the same category.
@berndpdx I'll give it some thought, too - I can work on this later, and I'll send a ew patches to make sure I'm on the right track, then do the rest....
@berndpdx I can start working on a library today - since I'm new at this, Why don't I work on one that we both have, so you can check my work? ...
@berndpdx If you upload your images to something like Imgur, you can copy/paste the code to have your pics and screenshots appear in tour posts, just ...
@berndpdx Glad I could help in some small way. I don't see how, with so many UVI libraries, that there's any other way than to do separate Unify ver...
@berndpdx THANK YOU SO MUCH!!! I loaded up your file and everything works great except... I'm getting errors on all of the "Preset Tour" patches -...
@berndpdx Thanks again for all your help! I have other control surface hardware (A Presonus Faderport 8, a Novation Launchpad XL that I'm using with s...
@berndpdx GREAT!!! Thank you so much!
@berndpdx Got my Maschine Jam today - I'm still getting everything connected and set up, but was wondering if you might have any templates already set...
@berndpdx I saw the new thread, and I'm following - Looking forward to seeing what you come up with - Thank you for taking the time to do this! ...
@berndpdx If you're interested in someone to help try out or test your ideas and offer suggestions from a user, I'd be happy to help. I'd be intereste...
@berndpdx Thank you for taking the time to discuss these different ways of using Scaler with Unify!
@getdunne Shane, it's really not a big deal about John - I know he's busy, and I always hear from him eventually! I also understand about the forum ...
@berndpdx Thanks! I'm waiting for it to arrive on Friday, and I can't wait - I hope you won't mind if I have questions that I might ask you for help. ...
@getdunne I just purchased a Machine Jam, partially because of seeing John use his - It seems that there are a few of us here, and I reached out to Jo...
I frequently use Scaler 2, and I guess I'm not understanding how or what you want to accomplish with making presets for Unify. Currently, I didn't fee...
@zinct As far as I'm aware, I have everything I should - There are subfolders for content that had more than one pack (like Glorkglunk), according to ...